1 - 10 of 19 Search Results for optical isolator
|
|
|
2.
Stainless Steel Cutting with 500W CO 2 Laser
|
|
... stainless steel less than 3 mm thick. Laser Used: K-Series 10-Micron Process: The beams from various Coherent CO 2 lasers were sent through an optical isolator and a circular polarizer before being focused by a lens in a gas-jet cutting assembly. The gas nozzle on the cutting head had a 1.5-mm diameter ...
Related Searches: laser cutting | cutting
|
|
|
|
3.
cqeofiDS
|
Best match in this PDF
|
All matches in this PDF
|
D I A M O N D CO2 Laser TechnologyCQE,OFIAccessories The Cut Quality EnhancerTM (CQE) and the Optical Feedback Isolator (OFI) are bolt-on modules that significantly increase the material processing capabilities of Coherent's DIAMONDTM CO2 lasers and protect the lasers from back-reflections-- while ...
Related Searches: polarizer | co2 laser price
|
|
|
|
|
5.
Diamond_Integrators_Guide_RevAA
(PAGE 34 OF 56)
|
|
|
... optics so that they are destroyed. It is essential for GEM-series laser systems used in high beam return (back reflection) modes, to have an optical isolator in the beam delivery system. An isolator is a mirror with a coating that reflects S-polarized light (light polarized normal to the plane of reflection ...
|
|
|
|
|
6.
Diamond_Integrators_Guide_RevAA
(PAGE 53 OF 56)
|
|
|
... 45 Material processing 3 Mirages 26 Moving Beam seals 26 Beam system 21 Laser 22 O OEM interface 38 OEM package 14 Operating controls 10 Optical isolator 28 Optics basics 30 P Performance 7 Performance package 15 Polarization 27
|
|
|
|
|
7.
Kiss Cutting of Adhesive-Backed Paper with a CO 2 Laser
|
|
... and no damage to the backing layer. Laser Used: G-Series Process: The 10.6-µm output beam from a Coherent G-150 CO 2 laser was sent through an optical isolator and a circular polarizer before being expanded by a 2X Keplerian telescope. A 62-mm lens was used to give a theoretical spot size of 70 µm ...
Related Searches: paper cutting | g150 | cutting
|
|
|
|
|
8.
Thin-Film Thermoplastic Cutting with a 150-W CO 2 Laser
|
|
... -Series Process: The output beam from a Coherent G-150 CO 2 laser, operating at 150W at 10.6-µm, was sent through a cylindrical correcting lens, an optical isolator and a circular polarizer. A beam expander was then used to transform the beam to a 16-mm diameter. A 63-mm focal length focusing lens, ...
Related Searches: g 150 | diamond | thin film
|
|
|
|
|
9.
Dieboard Cutting with CO 2 lasers
|
|
... with a minimum of charring on the cut surface. Laser Used: K-Series 10-Micron Process: The beam from a Coherent K-500 laser was sent through an optical isolator and a circular polarizer before being focused by a 127-mm focal length lens in a Coherent gas-jet cutting assembly. This produced a theoretical ...
Related Searches: circular polarizer | k500 | cutting
|
|
|
|
|
10.
Mild Steel Cutting with 500W CO 2 Laser
|
|
... and the carbon contained in these steels. Laser Used: K-Series 10-Micron Process: The beams from various Coherent CO 2 lasers were sent through an optical isolator and a circular polarizer before being focused by a lens in a gas-jet cutting assembly. The gas nozzle on the cutting head had a 1.5-mm diameter ...
Related Searches: metal cutting | laser cutting | cutting
|
|
Coherent Contact Information