1 - 10 of 55 Search Results for phosphor
|
|
|
1.
UV Beam Prosp. engl.
(PAGE 3 OF 6)
|
|
…suitable glass plate coated with a
fluorescent phosphor (F-plate) so
that the UV radiation is converted
into the visible range of the
spectrum. The linearity, uniformity
and resistance against radiationinduced bleaching of the phosphor material have been considered in selecting the…
|
|
|
|
2.
60390-344e-LFW
|
Best match in this PDF
|
All matches in this PDF
|
…covers 60% to 70% of the NTSC (National Television Systems Committee) color gamut because of the limited color saturation (spectral purity) of the phosphor emissions. Moreover, L ANDREW MASTERS is director of marketing and COLIN SEATON is director of business development at Coherent, Santa Clara, CA;…
Related Searches: galvanometer | ops
|
|
|
|
|
6.
ss259.pdf
(PAGE 9 OF 58)
|
|
…alloy Allowable content of lead
Steel Less than 0.35 wt%
Aluminum alloys Less than 0.4 wt%
Copper alloys (including brass and
phosphor bronze)
Less than 4 wt%
Solder Less than 1 000 ppm
Related Searches: frit sealing
|
|
|
|
|
7.
60390-344.indd
(PAGE 1 OF 3)
|
|
…to 70%
of the NTSC (National Television Systems Committee) color gamut because of the limited color saturation
(spectral purity) of the phosphor emissions. Moreover,
L
ANDREW MASTERS is director of marketing and COLIN SEATON is director of business development at Coherent, Santa Clara…
|
|
|
|
|
8.
Book.book
(PAGE 29 OF 44)
|
|
LaserCam-HR-UV User Manual
20
Pixel Spacing The LaserCam-HR-UV camera incorporates a phosphor
coating. The granularity of this thin coating results in an
effective pixel size of 20.0 x 20.0 µm. In comparison, the
CMOS array without the UV coating has a 6.7 x 6.7 µm
pixel…
|
|
|
|
9.
[DiodeLaserCladdingProducesHighQualityCoatings.doc]
|
|
|
…effect of the acid on the substrate and clad. Corrosion testing was also completed on the NiCrMo alloy by immersing the clad and substrate in a phosphoric acid solution. Wear testing was done on the Cobalt based clad layer. The standard pin on disk test was done in accordance with ASTM G99 to determine…
|
|
