…integrated within the sensor head cable. Specifically, Coherent's entire range of high performance EnergyMax sensors are now available in this form factor with either RS-232 or USB 2.0 connectivity. This product range enables measurement of the energy per pulse or average power of pulsed lasers from…
Related Searches:laser power and energy meters | j-10mt | j-10si-he | j25mb-le
…input powers, and unlike a photodiode-based sensor they will not saturate. The spectral range is dependent upon the coating applied to absorb the laser power.The coating used on many thermopiles is broadband in nature and is relatively flat from the ultraviolet through the infrared. These sensors have…
Related Searches:pm rs ps19q | powermax 5100 | quadrant detector | powermax usb pm10-19c
…input powers, and unlike a photodiode-based sensor they will not saturate. The spectral range is dependent upon the coating applied to absorb the laser power. The coating used on many thermopiles is broadband in nature and is relatively flat from the ultraviolet through the infrared. These sensors have…
Related Searches:laser power measurement | pulse energy measure | wavelength correction | laser check power meter
…Sensor is functioning and the driver has been properly loaded. Lights flashing fast (10 Hz) The sensor is taking power measurements and sending data over the host port. PowerMax-USB/RS User Manual 12 PowerMax-RS LED Lights Powering PowerMax-RS Sensors The PowerMax-RS sensor is powered via a +5 VDC power…
Related Searches:photodiode sensor | spectral correction | pm usb ps19q | powermax manual
…User Manual 22 Powering EnergyMax-RS Sensors The EnergyMax-RS sensor is powered via a +4 to 20 VDC power supply input. This power can be applied with either an external power supply (not included), as shown below, or input through Pin 1 of the DB-9 connector. An optional external power supply can be ordered…
Related Searches:pulse width | lab max | 1064 532 | spectral correction
…temperature. Historically this has limited the average power to which a sensor can be exposed. Coherent has implemented a temperature compensation circuit into EnergyMax sensors to limit the amount of error associated with operation at higher average powers. This circuit allows measurement of higher pulse…
Related Searches:field max ii top power energy meter | pyroelectric sensor | j-50mb-yag | j50