Ask a Question
Coherent

Search Results

1 - 12 of 8195 Products for 'products' Page 1 of 683 |

products

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf

product warranty rate 95% · Shipment of C24 orders within 24 hours For Product Reliability, Speed of Responsiveness, and Technical Support, make the safe choice you can always count on - Coherent. To keep informed about our latest laser measurement and beam diagnostics product releases, product

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf

16 Superior Reliability & Performance · www.Coherent.com · LMC.sales@coherent.com The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45…

OBIS Laser Product Drawing

® THIRD ANGLE PROJECTION 19.0mm .75in 15.5mm .61in LASER APERTURE M6 X 0.75 THREAD 2.54mm [0.1in] DEEP 38.1mm 1.50in 40.0mm 1.57in SAFETY SHUTTER 70.0mm 2.76in OEM LABEL 3.0mm .12in 64.0mm 2.52in 5.0mm .20in 30.0mm 1.18in 3.2mm .13in 4 PLACES 640 OBIS LASER SHOWN. ALL DIMENSIONS ARE TYPICAL FOR ALL…

OBIS FP Product Drawing

® THIRD ANGLE PROJECTION 1.0m 39.37in MINIMUM 70.0mm 2.76in 38.0mm 1.50in 28mm 1.1in 3.0mm .12in 64.0mm 2.52in 30.0mm 1.18in 5.0mm .20in 3.2mm .13in 4 PLACES COVER AND STRAP FC CONNECTOR KEY TYPE R - NARROW KEY (2.0mm +0.02/-0.03mm KEY WIDTH) OBIS 640 FP LASER SHOWN. ALL DIMENSIONS ARE TYPICAL FOR…

OBIS 1L Remote Product Drawing

® THIRD ANGLE PROJECTION 104.9mm 4.13in 32.0mm 1.26in 35.9mm 1.41in FRONT VIEW 67.5mm 2.66in 16.2mm .64in 9.5mm .37in 5.5mm .22in MAXIMUM TOP VIEW 12.0mm .47in 2 PLACES 43.5mm 1.71in 2 PLACES 9.2mm .36in 2 PLACES 13.7mm .54in 2 PLACES 8X 4-40 UNC BOTH SIDES FASTENER DEPTH 4mm [.16in.] MAXIMUM SIDE…

OBIS 1L Remote Product Drawing

® THIRD ANGLE PROJECTION SECOND REMOTE SOLD SEPARATELY STACKED REMOTE BRACKET INSTALL INCLUDED HARDWARE 2 EACH STACKING BRACKET 2 EACH MOUNTING BRACKET 4 EACH: M6X8 HEX SCREW 1/4-20X0.38" HEX SCREW 1/4" FLAT WASHER 8 EACH #4 SELF TAPPING SCREW INCLUDED BUT NOT SHOWN 5mm HEX WRENCH 3/16" HEX WRENCH…

OBIS 1L Remote Product Drawing

® THIRD ANGLE PROJECTION 37.8mm 1.49in 75.7mm 2.98in SECOND REMOTE SOLD SEPARATELY 2.0mm .08in 63.5mm 2.50in 140mm 5.5in 50.0mm FOR METRIC TABLE 125.0mm FOR METRIC TABLE 2.00in FOR INCH TABLE 5.00in FOR INCH TABLE M6 OR 1/4in. MOUNTING 4 PLACES Title: PROPRIETARY NOTICE: THE INFORMATION CONTAINED IN…

OBIS Single Laser Power Supply Product Drawing

® THIRD ANGLE PROJECTION 29.5mm 1.16in 105.8mm 4.17in 42.3mm 1.67in CABLE LENGTH 1220mm 25mm [48" 1"] CONNECTOR- 2-PIN MALE CONNECTOR MOLEX PART NUMBER SDA43025-0200 2X CONTACT PIN MOLEX PART NUMBER 43030-0009 SCHEMATICPIN 1 AT 1 2VDC PIN 2 GROUNDIEC-320-C14 INPUT RECEPTACLE UNIVERSAL 90/264 VAC…

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Jan. 22, 2015 Fig. 1: Multiphoton microscopy provides inherent three-dimensional resolution. With conventional (single photon) excitation of samples, fluorescence is excited along the entire beam path. With multiphoton absorption, fluorescence is only excited by the high intensity at the beam waist.…

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Until very recently, most laser sources for multiphoton microscopy were based on titanium:sapphire (Ti:S) technology. By incorporating an optical parametric oscillator (OPO), Ti:S based lasers can provide two independently tunable wavelengths. This is still the preferred and best source for many…

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Jan. 22, 2015 Fig. 1: Multiphoton microscopy provides inherent three-dimensional resolution. With conventional (single photon) excitation of samples, fluorescence is excited along the entire beam path. With multiphoton absorption, fluorescence is only excited by the high intensity at the beam waist.…

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Optogenetics Relies on Multiphoton Microscopy | Imaging & Microscopy - Research, Development, Production

Until very recently, most laser sources for multiphoton microscopy were based on titanium:sapphire (Ti:S) technology. By incorporating an optical parametric oscillator (OPO), Ti:S based lasers can provide two independently tunable wavelengths. This is still the preferred and best source for many…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions