Superior Reliability & Performance

• Lasers and Laser-based Systems
• Laser Measurement and Control
• Precision Optics
• Related Accessories

---

1.    pdf 232 Best match in this PDF  |  All matches in this PDF …10 W Pulse Energy 1 mJ Pulse Duration 15 +/3 ns Figure 3: Water absorption coefficient. Excimer Laser Technology: Laser Sources, Optics, Systems and Applications is a comprehensive handbook highlighting current excimer laser applications. Leading authorities on the subject of excimer lasers and related… Related Searches: excimer pumped dye laser | ns laser | krf laser | lambda physik dye laser

2.    Avia 266 Preinstallation Best match in this PDF  |  All matches in this PDF …pulse (See Section Three, Operation, within the operator's manual for details). Note that this is an alternate to DB 25 pins 20 and 21 Pulse Sync Out TTL low output signal synchronous with the laser pulses. External Enable Active low TTL input. If the signal is disconnected or pulled high no laser pulsing… Related Searches: shutter kits | laser diode | shutter | ps 10

3.    2009 LMCCatalog Best match in this PDF  |  All matches in this PDF …sensors are a great all-purpose technology suitable for many lasers.They are used for measuring CW laser power, average power in pulsed lasers, and are often used to integrate the energy of long pulses. Thermopile sensors absorb incident laser radiation and convert it into heat.This heat ultimately flows… Related Searches: lm 1 | 532 laser | lm-45 htd | verdi-v5

4.    ExcimerProductGuide2011 Best match in this PDF  |  All matches in this PDF …pulse length and high peak power of LPXpro and LPFpro lasers combine to optimize UV applications. These characteristics, plus their proven reliability and low cost of ownership make LPXpro lasers suitable for a wide range of demanding, high precision processing tasks. These include drilling, pulsed laser… Related Searches: 450 laser | braggstar s 200 | microlas attenuator | premix gas

5.    Avia 355-355X Preinstallation Best match in this PDF  |  All matches in this PDF …pulse (See Section Three, Operation, within the operator's manual for details). Note that this is an alternate to DB 25 pins 20 and 21 Pulse Sync Out TTL low output signal synchronous with the laser pulses. External Enable Active low TTL input. If the signal is disconnected or pulled high no laser pulsing… Related Searches: avia 355 operator manual | avia pulse width | avia 355 x | avia 355-x

6.    COHR LMC 2010-2011catalog Best match in this PDF  |  All matches in this PDF …sensors are a great all-purpose technology suitable for many lasers.They are used for measuring CW laser power, average power in pulsed lasers, and are often used to integrate the energy of long pulses. Thermopile sensors absorb incident laser radiation and convert it into heat.This heat ultimately flows… Related Searches: power meter model 201 | beam diagnostics | lm-5000 | lm 2 vis

7.    LMC 2011catalog 0411 Best match in this PDF  |  All matches in this PDF …sensors are a great all-purpose technology suitable for many lasers.They are used for measuring CW laser power, average power in pulsed lasers, and are often used to integrate the energy of long pulses. Thermopile sensors absorb incident laser radiation and convert it into heat.This heat ultimately flows… Related Searches: pm150 | j100 | pm150 19b | high speed driver

8.    pdf 128 Best match in this PDF  |  All matches in this PDF …melt produced when using long pulsed lasers. Irregular and incomplete melt expulsion affects the shape of the hole, produces recast layers and may even completely close a hole which was open initially. The depth which can be heated to melting temperature during a laser pulse of length is determined by the… Related Searches: 355 nm laser | trepanning | beam quality factor | co2 pulse laser

9.    UCLD Catalog Customer 9 11 new Best match in this PDF  |  All matches in this PDF …laser system. Key Topics: Laser and electrical safety; thermal management; FAP diagnosis, replacement, and calibration; ThermEQ; Pulse Delete; ThermaTrack; SHG/THG/FHG temperature optimization; head-power supply swaps; RS-232 operation; software upgrades. Prerequisites: Some experience with lasers… Related Searches: duv laser | mbr | coherence length | thyratron switch

10.    Diamond Integrators Guide RevAA Best match in this PDF  |  All matches in this PDF …Pulse Mode. 0 V to 7 V = CW Mode 7.2 V to 10 V = Enhanced Pulse Mode Interfacing Diamond Lasers to Systems 37 Table 6. Signal Interface Description and Connector Pinout for GEM-30 PIN NO. SIGNAL DESCRIPTION 1 RF Enable TTL logic input; 1=RF ON, 0=RF OFF; 1 k impedance This input turns on the laser.… Related Searches: k 250 manual | diamond manual | expander | variable laser attenuator

---

Search Suggestions: ns laser | picosecond laser | excimer pumped dye laser | rhodamine 560 | krf laser | lambda physik dye laser | q-switched | sapphire windows | hot mirror | 591

Page 1 2 3 4 5 6 7 8 9 10 11>> of 269 | Next

Site Search by