---

1.    AVIA355_20 Best match in this PDF  |  All matches in this PDF ... with RS-232 interface · Total Pulse Control system · HGX UV generation technology · ThermEQ for uniform pulse energy across a burst of pulses · PulseEQ for locked pulse energy across a range of pulse repletion rates · PulseTrack for pulse energy control on-the-fly Coherent Solid-State System Specifications1 ... Related Searches: avia 355-20 | permalign | lifetime

2.  Silicon Wafer Dicing and Scribing ... throughput and higher yield. The advantage of the AVIA 355-23-250 is that it can do a good job of both scribing, using small energy pulses (using PulseEQ) at a high rep rate to scribe through 10 µm (typ.) top layer of circuitry.  The AVIA 355-23-250 can then quickly switch to much higher energy ... Related Searches: pico | wafer | 355-23 | wafer cutting

3.    AVIA355_20  (PAGE 1 OF 2) ... with RS-232 interface · Total Pulse Control system · HGX UV generation technology · ThermEQ for uniform pulse energy across a burst of pulses · PulseEQ for locked pulse energy across a range of pulse repletion rates · PulseTrack for pulse energy control on-the-fly Coherent Solid-State System Specifications1 ... Related Searches: avia 355-20

4.  Metal Marking with DPSS Lasers ... and 2000-mm/sec. scanner speed. Shallower or deeper marks can be obtained by changing the laser repetition rate (for higher pulse energies) or using PulseEQ (which allows the repetition rate and pulse energy to be custom tailored) to optimize the system at lower pulse energies. Fig. 1 - Marks with a ... Related Searches: laser marking | 70w

5.    Avia_266_Preinstallation  (PAGE 26 OF 38) ... DELETE=n PD=n This command changes the PULSE CONTROL mode of operation and is NOT recommended for AVIA 266. n=1 Pulse Delete On n=2 ThermEQ On n=3 PulseEQ On n=4 PulseTrack On PULSE DELETE AUTO CALCULATE=n PDAC=n Controls whether timing calculations for delay time are changed with internal repetition ...

6.    Avia_266_Preinstallation  (PAGE 34 OF 38) ... FOR PULSE DELETE AND THERMEQ FUNCTIONS: PRINT PULSE DELETE ?PD Returns the PULSE CONTROL mode of operation. 1 = Pulse Delete On 2 = ThermEQ On 3 = PulseEQ On 4 = PulseTrack On PRINT PULSE DELETE AUTO CALCULATE ?PDAC Returns status of manual or automatic calculation of Delay Times: 0 for manual setting ...

7.  Coherent Press Release ... .     The AVIA 532-45 incorporates the same high precision pulse control features found in lower power AVIA models.   These include PulseEQ™ to deliver constant pulse energy over time, even with varying repetition rates, and ThermEQ™ to guarantee uniform pulse energy when the laser ... Related Searches: avia532

8.    Avia_266_Preinstallation  (PAGE 35 OF 38) External Computer Control 29 PRINT MODE2 RAMP SLOPE ?RS2 Returns the ThermEQ Ramp Slope percentage (RS2) for the ThermEQ, PulseEQ, and PulseTrack modes (MODE2) of operation. PRINT RAMP TIME OFFSET ?RTO Returns the Ramp Time Offset in microseconds for the Pulse Delete function. This time is the default ...

9.  Coherent Press Release ...   These include PosiLock™, which is Coherent’s proprietary technology for achieving highly repeatable spot positioning at the work surface, PulseEQ™, which provides constant pulse energy ac ross a wide range of rapidly varying pulse repetition rates, and an automated harmonic crystal shifter ... Related Searches: santa clara ca

10.    Avia_355-355X_Preinstallation  (PAGE 27 OF 38) ... DELETE=n PD=n This command changes the PULSE CONTROL mode of operation and is NOT recommended for AVIA 266. n=1 Pulse Delete On n=2 ThermEQ On n=3 PulseEQ On n=4 PulseTrack On PULSE DELETE AUTO CALCULATE=n PDAC=n Controls whether timing calculations for delay time are changed with internal repetition ...

---

Search Suggestions: avia 355-20 | pico | wafer | 355-23 | wafer cutting | scribing | permalign | wafer dicing | laser scribing | lifetime

Page 1 2 of 2 | Next

Site Search by

Coherent Contact Information