Search for Lasers, Laser Systems, Laser Measurment, Laser Service Coherent Inc., Worldwide websites Coherent Inc., calendar of events Coherent Inc., office locator Coherent Inc., Service Centers
     > Search
Search Coherent
Coherent Inc.
Superior Reliability & Performance
  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
Please enter a search phrase.

1 - 10 of 124 Search Results for purge
Search Suggestions: braggstar | chameleon | chameleon laser | coherent chameleon
1.  pdf document  Chameleon_brochureRevB Best match in this PDF  |  All matches in this PDF
... -designed MRU air recirculator, Chameleon tunes effortlessly through atmospheric water vapor absorption lines, without the need for an external purge. Dependable as well as agile, Chameleon incorporates our patented, field-proven Kerrlens modelocking technique, which is the most straightforward, reliable ...
Related Searches: chameleon | chameleon laser | coherent chameleon

2.  pdf document  HighLight_1000F_OEM_Preinstall_RevAA  (PAGE 8 OF 29)
... , the pass-through should be baffled or hooded to prevent stray light from exiting any laser safety enclosure. The process head accessories (chiller, purge gas supply and any controls) must be sited such that the length of tubing and cabling can reach the process head under all operating conditions. ...

3.  pdf document  Innova300C_fredmotofred_preinstallation  (PAGE 13 OF 32)
... stability, or frequency stability, the use of pressure and temperature regulators on the cooling water system may also be advantageous. Nitrogen Purge A steady flow of 0.5-1.0 SCFH (Standard Cubic Feet/Hour) of dry Nitrogen is required in order to keep proper intracavity space conditions. The Nitrogen ...
Related Searches: bbo crystal

4.  pdf document  Paper_LPM2004Rev2 Best match in this PDF  |  All matches in this PDF
... , the laser tube windows achieve typical lifetimes of 100 to 200 million pulses depending on the operational duty cycle, and the externally mounted, purged resonator optics in the LPX typically last more than 200 million laser pulses. The performance of an excimer laser is dependent on laser gas, the ...
Related Searches: pointing stability | lpx | halogen filter

5.  pdf document  ExcimerLasersforSuper-HighNA193nmLithographyRev2  (PAGE 3 OF 7)
... a moving average window of 100 laser pulses. 2.2 Optical Stability Operation at 193nm wavelength requires careful selection of materials and perfect purging of the beam path. At a laser power level significant amount of energy is deposited in the optical elements and modules due to absorption losses ...

6.  pdf document  Diamond_E-400_Preinstallation_RevAB  (PAGE 3 OF 39)
... Electrical Service . 1 Cooling. 1 Coolant Composition . 2 Coolant Filtering. 3 Freeze/Burst Protection. 3 Operation in Humid Environments. 4 Optics Purge Gas. 5 Guidelines for Use of Compressed Air for Purge. 6 Installation . 7 Preparing the Facility for Installation . 7 Unpacking and Inspection . 10 ...

7.  pdf document  HighLight_1000F_OEM_Preinstall_RevAA  (PAGE 9 OF 29)
... the accessory manuals for physical specifications (size and weight) as well as all additional space recommended for service access and ventilation. Purge Gas To maintain non-condensing operation of the HighLight 1000F it is important to provide the proper purge gas supply as specified below and in Table ...

8.  pdf document  Innova300C_fredmotofred_preinstallation  (PAGE 14 OF 32)
... /gal) or 100 parts/million of calcium Particulate size <200 microns in diameter. 5 Maximum heat load 20 kW @ 230 VAC 18 kW @ 208 VAC NITROGEN PURGE Recommended flow rate 0.5 to 1.0 SCFH Note: These figures include the two 7.6 meter (25 ft.) lengths of 16 mm (5/8 inch) I.D. hose which are supplied ...

9.  pdf document  Diamond_E-400_Preinstallation_RevAB  (PAGE 4 OF 39)
Diamond E-400 Preinstallation Manual iv LIST OF ILLUSTRATIONS 1. Block Diagram Illustrating Installation of Optional Purge Kit. 6 2. Removing Crate Cover . 11 3. Top Cover Removed . 12 4. Water Hoses and Filter Removal . 12 5. Unstrapping the System. 13 6. Removing Side Panels . 13 7. E-400 in Moisture ...

10.  pdf document  HighLight_1000F_OEM_Preinstall_RevAA  (PAGE 10 OF 29)
HighLight 1000F OEM Pre-installation Manual 4 Coherent strongly recommends running the purge gas continuously (24/7) in very humid environments, whether the laser is in use or not; an oil-free air compressor, dryer, and filter may be economical in some situations. High-pressure bottles (Praxair, Linde ...

Page 1 2 3 4 5 6 7 8 9 10 11>> of 13 | Next


Site Search by  Site Search powered by SLI Systems