1 - 10 of 14 Search Results for q-switching
|
|
|
1.
Q-Switched Technology - Background
|
|
... materials. A shorter pulse is also possible by using an internal electro-optic modulator, such as a Q-switch (or cavity dumper). In the past, Q-switching was limited to military and very high-value applications, because the cadmium-telluride (CdTe) modulator crystals had to be carefully selected for ...
Related Searches: q-switch | cavity dump | q switched co2 | long wavelength
|
|
|
|
|
2.
Not Modelocking
|
|
|
... and Vitesse CW powers are adequate. Consult the Data Sheet shipped with the laser to ensure the Vitesse laser is lasing at a CW power between the Q-Switching and CW Breakthrough limits. Adjust the Verdi pump power accordingly. If the Verdi power is low, consult the Verdi "Low Power" troubleshooting ...
|
|
|
|
|
3.
Nonlinear Optics
|
|
... for second harmonic generation (SHG), sum and difference frequency generation (SFG) (DFG), optical parametric oscillation (OPO), electrooptic Qswitching and modulation, and as substrates for optical waveguides. OPO devices based on these crystals are reliable, solid state sources of tunable laser radiation ...
Related Searches: ktp | rta | nonlinear crystal
|
|
|
|
4.
Avia_266_Preinstallation
(PAGE 34 OF 38)
|
|
|
... Pulse Delete PRINT MINIMUM RF OFF TIME ?TOMIN Returns minimum RF off time in microseconds. This time is the minimum time the RF can be off while q-switching in Pulse Delete and ThermEQ modes PRINT DELAY TIME ?DT Returns the Delay Time in microseconds. PRINT MODE1 DELAY TIME ?DT1 Returns the RePumpTime ...
|
|
|
|
|
5.
UCLD_Catalog_Customer
(PAGE 15 OF 40)
|
|
|
... and electrical safety; thermal management; power supply layout; circuit familiarization; head design; FAP diagnosis, replacement, and calibration. Q-switching; current calibrations, pump-source analysis, PCBA replacement, performing electrical measurements and calibrations; troubleshooting techniques ...
|
|
|
|
|
7.
CO2LasersImproveRev2
(PAGE 2 OF 3)
|
|
... materials. A shorter pulse is also possible with the use of an internal electro-optic modulator as a Q-switch (or cavity dumper). In the past, Q-switching was limited to military and high-value applications, because the cadmium-telluride (CdTe) modulator crystals had to be carefully selected for zero ...
Related Searches: q-switch | q-switched co2 laser | cavity dump
|
|
|
|
|
8.
304_CoherentReprintRev2
(PAGE 2 OF 2)
|
|
... is possible with a variation of the waveguide configuration. This involves adding an electro-optic modulator inside the laser cavity to perform the Q-switching function. The laser can then obtain pulse widths approaching 0.1 µs with peak powers greater than 100 kW at pulse rates of up to 100 kHz. The ...
Related Searches: q-switched co2 laser
|
|
|
|
|
9.
304_CoherentReprintRev2
|
Best match in this PDF
|
All matches in this PDF
|
... is possible with a variation of the waveguide configuration. This involves adding an electro-optic modulator inside the laser cavity to perform the Q-switching function. The laser can then obtain pulse widths approaching 0.1 µs with peak powers greater than 100 kW at pulse rates of up to 100 kHz. The ...
Related Searches: waveguide
|
|
Coherent Contact Information