Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 251 Search Results for q-switch v

1pdf document  Avia 266 Preinstallation Best match in this PDF  |  All matches in this PDF
…Preinstallation Manual 10 Table 5. EXTERNAL INTERFACE Connector Pinouts THIS CONNECTOR IS A DB-25 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR. PIN DESCRIPTION FUNCTION 1 Analog Ground Analog signal ground reference. 2 Analog Input 1 0 to +5 V. (DO NOT USE) 3 Analog Input 2 0 to +5 V. (DO NOT USE) 4 Not Used…
Related Searches: short pulse laser | power supply | beam shutter | shutter kits

2pdf document  Avia 355-355X Preinstallation Best match in this PDF  |  All matches in this PDF
…from system. 11 Table 5. EXTERNAL INTERFACE Connector Pinouts THIS CONNECTOR IS A DB-25 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR. PIN DESCRIPTION FUNCTION 1 Analog Ground Analog signal ground reference (do not use). 2 Analog Input 1 0 to +5 V. (DO NOT USE) 3 Analog Input 2 0 to +5 V. (DO NOT USE) 4 Not…
Related Searches: coherent avia-355 laser | pulse check | manual | avia-x

3Avia_preinstall.book  (PAGE 17 OF 38)
…ground reference for pin 17. This ground is connected to the chassis.
19 Not used -- --
20 Pulse Trigger In Input signal that triggers the Q-Switch and produces a laser pulse. Apply more than
3.0 V referenced to pin 21 for a high level signal. Open circuit or apply less than
1.0 V for…

4Avia_preinstall.book  (PAGE 18 OF 38)
…ground reference for pin 17. This ground is connected to the chassis.
19 Not used -- --
20 Pulse Trigger In Input signal that triggers the Q-Switch and produces a laser pulse. Apply more than
3.0 V referenced to pin 21 for a high level signal. Open circuit or apply less than
1.0 V for…

5Avia_preinstall.book  (PAGE 17 OF 38)
…ground reference for pin 17. This ground is connected to the chassis.
19 Not used -- --
20 Pulse Trigger In Input signal that triggers the Q-Switch and produces a laser pulse. Apply more than
3.0 V referenced to pin 21 for a high level signal. Open circuit or apply less than
1.0 V for…

6Avia_preinstall.book  (PAGE 18 OF 38)
…ground reference for pin 17. This ground is connected to the chassis.
19 Not used -- --
20 Pulse Trigger In Input signal that triggers the Q-Switch and produces a laser pulse. Apply more than
3.0 V referenced to pin 21 for a high level signal. Open circuit or apply less than
1.0 V for…

7pdf document  ACF2A0B Best match in this PDF  |  All matches in this PDF
…Broadband/Blackbody Emmiters 2 Erbium:YAG Use with the following Lasers and Sources: High damage threshold probes >26 kW/cm focused CW 5.0 J/cm Q-switched Broad, flat spectral response 0.19 to 11µm Wide dynamic range - 100 µW to10 kW Fast response time - from 1 sec 19, 50, 200 mm diameter sensors…
Related Searches: power meter calibration | field mate meter | fiber cleaving | thermopile response wavelength

8pdf document  COHR AVIA2012 Catalog 9 Best match in this PDF  |  All matches in this PDF
…Product Guide Superior Reliability & Performance · www.Coherent.com · tech.sales@coherent.com2 AVIATM is a family of diode-pumped, solid-state, Q-switched lasers, available with average powers currently ranging from 3W to 45W.These lasers deliver high repetition rate and high output power at wavelengths…
Related Searches: fly | coherent avia-355 laser | avia 355-14 | avia 355-10-20

9pdf document  CO2LasersImproveRev2 Best match in this PDF  |  All matches in this PDF
…plastics and delicate materials. A shorter pulse is also possible with the use of an internal electro-optic modulator as a Q-switch (or cavity dumper). In the past, Q-switching was limited to military and high-value applications, because the cadmium-telluride (CdTe) modulator crystals had to be carefully…
Related Searches: q switched co2 | rf excited co2 laser | co2 laser short pulse | fiber laser

10PRISMA_1064V_DSrevB  (PAGE 2 OF 2)

Laser Head
Laser Medium Nd:YVO4
Pump Source Long-Life Aluminum-Free Active Area (AAATM) Pump Diodes
Pulse Unit Acousto-Optical Q-Switch
Laser Parameters
Wavelength (nm) 1064 1064
Nominal Power, CW (W) 16 20
Nominal Power, Pulsed (W) 13 at 30 kHz 17 at 50 kHz

Related Searches: prisma 1064-20 v | 1064 q-switch


Page 1 2 3 4 5 6 7 8 9 10 11>> of 26 | Next


Site Search by  Site Search powered by SLI Systems
.