1 - 10 of 11 Search Results for s200
|
|
1.
Application_Report_IOL-280807
|
Best match in this PDF
|
All matches in this PDF
|
|
... thee-axis precision motion table which is controlled by MMI software (Man Machine Interface) to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. The MMI software can control all relevant properties of the EXCISTAR S-200, including pulse ...
|
|
|
|
|
2.
50410-289
(PAGE 3 OF 4)
|
|
|
... , the company purchased a custom-made engraving station from Optiray Laser GmbH (Munich, Germany) that incorporated a 248nm excimer laser (ExciStar S-200) from Tui Lasers (now part of Coherent, www. coherent.com). Because these marks change from lens to lens, the system does not rely on the fixed mask ...
|
|
|
|
|
3.
Intra_ocular_lenses_2
|
Best match in this PDF
|
All matches in this PDF
|
|
... thee-axis precision motion table which is controlled by MMI software (Man Machine Interface) to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. The MMI software can control all relevant properties of the EXCISTAR S-200, including pulse ...
|
|
|
|
|
4.
Application_Report_IOL-280807
(PAGE 2 OF 4)
|
|
|
... thee-axis precision motion table which is controlled by MMI software (Man Machine Interface) to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. The MMI software can control all relevant properties of the EXCISTAR S-200, including pulse ...
|
|
|
|
|
5.
Application_Report_IOL-280807
(PAGE 4 OF 4)
|
|
|
... 99 email: rapter@staarag.ch internet: www. staar.com Contact: Reference: 3.3.1 Excimer Lasers Are Well Suited to the Ablation Process The EXCISTAR S-200 excimer laser, from TuiLaser at 248 nm, is of moderate repetition rate (200 Hz) and high power output (2 W). It is a class IV laser system and as such ...
|
|
|
|
|
6.
50410-289
|
Best match in this PDF
|
All matches in this PDF
|
... , the company purchased a custom-made engraving station from Optiray Laser GmbH (Munich, Germany) that incorporated a 248nm excimer laser (ExciStar S-200) from Tui Lasers (now part of Coherent, www. coherent.com). Because these marks change from lens to lens, the system does not rely on the fixed mask ...
Related Searches: excistar 200
|
|
|
|
|
7.
Intra_ocular_lenses_2
(PAGE 2 OF 4)
|
|
|
... thee-axis precision motion table which is controlled by MMI software (Man Machine Interface) to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. The MMI software can control all relevant properties of the EXCISTAR S-200, including pulse ...
|
|
|
|
|
8.
Intra_ocular_lenses_2
(PAGE 4 OF 4)
|
|
|
3.3.1 Excimer Lasers Are Well Suited to the Ablation Process The EXCISTAR S-200 excimer laser, from TuiLaser at 248 nm, is of moderate repetition rate (200 Hz) and high power output (2 W). It is a class IV laser system and as such presents potential hazards including: high voltage, toxic gases UV radiation ...
|
|
|
|
|
9.
MMI007_002_TUILASERAG4_2
|
Best match in this PDF
|
All matches in this PDF
|
... with laser ablation techniques. Staar Surgical uses a thee-axis precision motion table to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. All relevant properties of the EXCISTAR S-200, including pulse repetition, duration and triggering ...
Related Searches: tuilaser
|
|
|
|
|
10.
MMI007_002_TUILASERAG4_2
(PAGE 1 OF 3)
|
|
|
... with laser ablation techniques. Staar Surgical uses a thee-axis precision motion table to position the lens for ablation. A TuiLaser EXCISTAR S-200 excimer laser may be used to perform the actual etching. All relevant properties of the EXCISTAR S-200, including pulse repetition, duration and triggering ...
|
|
Coherent Contact Information