Superior Reliability & Performance

• Lasers and Laser-based Systems
• Laser Measurement and Control
• Precision Optics
• Related Accessories

---

1.    Sapphire SF Family DS 0211 Best match in this PDF  |  All matches in this PDF Sapphire SF Family of Lasers CW Blue and Green Single-Frequency Lasers Superior Reliability & Performance 15 mm (0.6 in.) 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) 43.2 mm (1.7 in.) 97.8 mm (3.85 in.) 14.2 mm (0.56 in.) 5.9 mm (0.23 in.) 117.8 mm (4.64 in.) 5 mm (0.2 in.) 10 mm (0.4 in.) 110 mm (4.3 in.… Related Searches: heat sink sapphire | sapphire manual | sapphire 488 200 | sapphire controller

2.  COHR_LifeSciencesGuide2010_0510.pdf  (PAGE 39 OF 68) …Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. System Specifications Sapphire 561 LP 568 LP Wavelength1 (nm) 560…

3.  Coherent Inc. Laser Set-Up Guidelines …experienced industrial end user with the installation of a new laser system. It is important to note that these reference guides are designed as a supplement to the product's Operator and/or Integrator manual. When installing these laser systems for the first time, end users must read the entire Laser… Related Searches: sapphire 488-20 manual | sapphire manual | compass 315m manual

4.  Sapphire561_DS  (PAGE 2 OF 4) …user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Sapphire 460-10, 488-10/20/25/30 have a maximum baseplate temperature of +55°C (+131°F). Sapphire…

5.  Sapphire561_DS  (PAGE 2 OF 2) …user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Sapphire 460-10, 488-10/20/25/30 have a maximum baseplate temperature of +55°C (+131°F). Sapphire… Related Searches: sapphire 488-20 manual | sapphire power supply | sapphire 488 200 | sapphire 488 lp

6.  BioinstrumentationOverview2008View_March09Edits.pdf  (PAGE 11 OF 32) …Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent o ers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service…

7.    COHR LifeSciencesGuide2012revGlowres Best match in this PDF  |  All matches in this PDF …location. 6 Electro-Static Discharge Standard IEC 1000-4-2, 1995. 7 Typically 85% of heat load through the base plate. See Users Manual for more detail. 8 Non-Condensing. See User Manual for more detail. 9 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. OBISTM Lasers for… Related Searches: 800 nm laser | medical lasers | solid state temperature controller | coherent connection

8.    Sapphire LP Family DSrevC 1211 1 Best match in this PDF  |  All matches in this PDF …5 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Sapphire 460-10, 488-10/20/25/30 have a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40… Related Searches: 200 mw 488 nm | sapphire 488-20 | sapphire 514 | 561 nm laser

9.    Diodes and OPSL vs HeCd Best match in this PDF  |  All matches in this PDF …been quickly and widely adopted by OEMs and end users alike, so that there are now over 25,000 OPSLs in the field, with over 2000 at the multiwatt level. www.Coherent.com I tech.sales@coherent.com I (800) 527-3786 I (408) 764-4983 4 Figure. 4: Sapphire LP: Coherent's series of OPSLs Comparison: Laser… Related Searches: 350 nm | 532 diode laser | he-cd laser | dpss 561

10.  BioinstrumentationOverview2008View_March09Edits.pdf  (PAGE 7 OF 32) …4 200 mm is 25% of Raleigh range. 5 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Sapphire 40, 50, 75 and 100 mW models limited to baseplate… Related Searches: 488 sapphire

---

Search Suggestions: sapphire manual | sapphire 488 200 | sapphire 488 nm | sapphire 488-20 | sapphire connection | heat sink sapphire | sapphire controller | sapphire 488-20 manual | sapphire 532 | sapphire power supply

Page 1 2 3 4 5 of 5 | Next

Site Search by