…ranging from 1 to 350 khz, with pulse energies ranging from a few uJ to over 45 mJ/pulse. QCW and Modelocked QCW and Modelocked Sapphire Lasers Sapphire Lasers Sapphire lasers feature outstanding performance and reliability, making them ideal for life science applications. Short-Pulse Lasers…
…Chameleon pump lasers, it gives access to an unprecedented automated tuning range of 340 nm to 1600 nm, with simple touch screen controls and no manual intervention. This OPO provides hundreds of milliwatts of output power over most of its tuning range that can be expanded to cover also the mid IR…
Astrella Preinstallation Manual
2 - 2
The Astrella optical bench assembly comprises of four modules:
· Vitara seed laser
· Revolution pump laser
· Regenerative amplifier (REGN)
The Coherent VitaraTM…
query returns Sapphire laser types. Review the
Sapphire manual for additional information.
1,2,3 Determines the response format for
commands and queries. OP=1 returns data in
the format described in the CUBE manual.
OP=2 returns data…
Pre-Installation Manual Vitara Modelocked Ti:Sapphire Laser 5100 Patrick Henry Drive Santa Clara, CA 95054 USA
Sapphire LP Datasheet
SPECIFICATIONS Sapphire Sapphire
458 LP 488 LP
Wavelength1 (nm) 458 ±2 488 ±2
Output Power2 (mW) 20, 50, 75 10, 20, 25, 30, 40, 50,
75, 100, 150, 200, 300
Spatial Mode TEM00, M2 <1.1
Beam Asymmetry 0.9 to 1.1
Beam Diameter at 1/e2…
Sapphire SF Datasheet
SPECIFICATIONS Sapphire 488 SF Sapphire 532 SF
Wavelength (nm) 488 532
Wavelength Accuracy (nm) 0.1
Single-longitudinal Mode, Linewidth (MHz) <1.5
Output Power1 (mW) 20, 50, 100 20, 50, 100, 150
TEM00, M2 <1.1, single…
…or other adequate heat sink.
7 Sapphire 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW
models are limited to a maximum baseplate temperature of +50°C (+122°F).
CW Visible Lasers from Deep Blue…
www.Coherent.com I email@example.com I (800) 527-3786 I (408) 764-4983 4
Figure. 4: Sapphire LP: Coherent's series of OPSLs
Comparison: Laser Diodes, OPSLs, Ion and HeCd
Table 2 highlights the main points of comparison
between the four different laser types -…
Libra Pre-Installation Manual
2 - 2
The Libra optical bench assembly comprises four modules (see
Figure 2-2 on page 2-3):
· Vitesse seed laser
· Evolution pump laser
· Regenerative amplifier (RA)
…Operator's Manual carefully before operating the
laser for the first time. Special attention must be given to the
material in Section One: Laser Safety.
Use of controls or adjustments or performance of procedures
other than those specified in this Operator's Manual may result…
…Cabinets for laser head and power supply of a Ti-Sapphire laser. (a) Front view.
The laser head and power supply BSC are outfitted with a manual valve for the intake of air from a ventilator
unit that maintains a positive pressure within each of them. The laser head BSC has built-in…
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.