Search Results

Refine

Result Type

1 - 12 of 13 Products for 'serial command' Page 1 of 2 |

serial command

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…If handshaking is OFF:
· All command and query responses will behave as explicitly
defined elsewhere in this section.
Baud Rate
Selects the transmit and receive baud rates together when the device
has an RS-232 serial host port. The command has no effect when the
device…

Meterless-Laser-Energy-Measurement-Concept-Lowers-Cost-and-Simplifies-Integration FORMFIRST.pdf

Meterless-Laser-Energy-Measurement-Concept-Lowers-Cost-and-Simplifies-Integration FORMFIRST.pdf


Interface Capabilities
All meterless EnergyMax sensors are available with
either RS-232 or USB 2.0 high speed connectivity. The
serial (RS-232) interface has been found to be most
popular amongst OEM integrators. Typically, industrial
and medical laser systems utilize a…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…if the command is sent outside of Snapshot mode and no STARt command has been issued.
Meter and Probe
Device
Information
The sensor can be queried for unit identification and quality control
information.
Meter Serial Number
This query gets the meter serial number.…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…0x81 Serial Comm Message Time-out
Bad RS-232 Header 0x82 Bad Serial Comm Message Header Character
Bad RS-232 Footer 0x83 Bad Serial Comm Message Footer Character
Bad Checksum 0x84 Bad Serial Comm Message Checksum
Command Sequence 0x85 Improper Command Sequence
Bad Command

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual


SYST:COMM:BAUD
Serial communication baud rate control command (persistent).
Command: SYST:COMM:BAUD <baud rate>
Query: SYST:COMM:BAUD?
Note: Default = 115200.
SYST:COMM:HAND
SCPI handshaking control command (persistent).
Command: SYST:COMM:HAND {ON|OFF}…

Avia preinstall.book

Avia preinstall.book

…instructions (long and short
forms) for use with the RS-232 interface.
Table 11. RS-232 Commands
COMMANDS ACTION PERFORMED
BAUDRATE=nnnnn
B=nnnnn
Sets the RS-232 Serial port baud rate to the specified value.
nnnnn = 1200, 2400, 4800, 9600, 19200, 38400, 57600

Book.book

Book.book

…a standard
serial cable.
The CUBE laser system uses the RS-232 remote communication
settings shown in the table, below.
Syntax:
Command=<value> A CUBE command is used to change a
present setting. The syntax used for CUBE commands is the
command followed by an…

Miniaturization-Technology-Provides-Next-Generation-Laser-Power-Measurement FORMFIRST.pdf

Miniaturization-Technology-Provides-Next-Generation-Laser-Power-Measurement FORMFIRST.pdf

…custom (non-Windows)
operating system, and which communicate with the
various sensors and controls in the equipment though
serial links and commands.
PowerMax-USB sensors are also ideal for other
embedded applications, such as power measurement in
manufacturing lines,…

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf

…a custom (nonWindows) operating system, and which communicate
with the various sensors and controls in the equipment
though serial links and commands.
PowerMax-USB sensors are ideal for other embedded
applications, such as power measurement in
manufacturing lines, laser…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…annodized AL 6061 T1
Commands Description
CDRH Enables/Disables CDRH Delay
BAUD Set Baud Rate
HAND Enables/Disables SCPI Handshaking
HOUR Reports System Lasing Hours
MOD Reports Laser Model
PNUM Reports Part Number
SNUM Reports Serial Number
USER Stores…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum
Page 8 of 16
Outputs:
oSerialNumber--a BSTR holding the serial number of the
addressed meter. It will be an empty string if an invalid meter is
addressed.
Because this property takes an input parameter, it can appear differently when used by…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…CUBE through the command line. Scripts can
also be executed and set to loop.The Terminal Screen
can accelerate the learning curve for laser control in
embedded applications.
Status Screen
The Status Screen shows the details of the laser from
serial number to operating…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions