... . 11 Power Supply Installation. 11 Power Connection. 11 Umbilical Connections . 12 Water Connections. 14 External Interlock . 15 External Switch. 16 HeatExchanger Control (option). 16 Remote Control Module Connection. 16 Rotating the Umbilical on the Laser Head. 16 Rotating the Umbilical on the Power ... Related Searches:innova 300 manual | innova 70 user manual | q switch | field mate
Innova Ion Laser Systems 20 The LaserPure 5i This water-to-air chiller is recommended for use with Coherent lasers with a heat load of up to 5 kilowatts. The LaserPure 20 This heatexchanger is recommended for use with Coherent lasers with a heat load of up to 20 kilowatts. The LaserPure 40 This heat ... Related Searches:laserpure 5
Weights and Dimensions The SmallFrameHeatexchanger weights and Dimensions are given in Table 10. Sabre HeatExchanger All Sabre laser systems include an integral HeatExchanger which is powered and controlled by the Sabre power supply via an interface cable. Please refer to the Sabre Operators manual ...
Water Cooling Guidelines 21 The use of this heatexchanger also improves beam pointing and power stability since the heatexchanger regulates the cooling water temperature within ±1°C (±1.8°F). The plant water required for the water to water integrated heatexchanger can be either tap water or any ...
... . 2 Specifications and Recommendations. 3 Water Flow Guidelines . 3 Water Temperature Specification . 5 Temperature Sensors. 5 Ambient Dew Point . 5 Heat Loads . 6 Water Quality. 7 Guidelines . 7 Construction Materials for Cooling Systems. 9 Recommended Pipe Size . 9 Types of Water Systems. 10 Flow-Through ... Related Searches:chiller | water chiller
... for 30 VAC, 12 Amps (maximum). It is not internally protected by fuses or other overcurrent protection devices. Refer to Figure 3 for TB1 pin-outs. HeatExchanger Control (option) On the rear panel of the Innova power supply is a plug labeled TO HEATEXCHANGER(Figure 3, Item 15). An interconnect cable ... Related Searches:heat exchanger
... for 30 VAC, 12 Amps (maximum). It is not internally protected by fuses or other overcurrent protection devices. Refer to Figure 3 for TB1 pin-outs. HeatExchanger Control (option) On the rear panel of the Innova power supply is a plug labeled TO HEATEXCHANGER(Figure 3, Item 15). An interconnect cable ...