1 - 10 of 47 Search Results for stretcher compressor
|
|
|
1.
Coherent Inc. RegA
|
|
…incorporates an external stretcher and compressor. The amplifier must be seeded by high bandwidth pulses from a Micra or Vitesse. RegA 9040 Offers the shortest pulse widths in the REgA family. Seeded by Micra or Mantis, it also is designed with an external; stretcher/compressor. * CW-pumped regenerative…
Related Searches: rega 9000 | rega 9050 | mantis
|
|
|
|
2.
OLEreprintCoherent-QUB
|
Best match in this PDF
|
All matches in this PDF
|
|
…access to transformlimited pulses from various locations between the regen erative amplifier and the four successive multipass amplifiers and final compressor. Edstrom adds that it is important to define spectral bandwidth early on in the Dream system: QUB's new ultrafast laser apparatus will be used to…
|
|
|
|
|
3.
Mixed gratings Tech Bull.qxd
(PAGE 1 OF 2)
|
|
…the stretcher has only quadratic phase, in fact there is significant
cubic and quartic phase. However, in the
perfectly matched system, each term in
the phase expansion of the compressor has
the same magnitude but opposite sign of
the stretcher. In real world stretchers,
…
Related Searches: compressor gratings | pulse stretcher | stretcher
|
|
|
|
|
4.
MP vs RGN Tech Bull.qxd
(PAGE 1 OF 2)
|
|
…added to the
dispersion of the stretcher and compressor, can result in less than ideal pulse
recompression. This is a compound
problem resulting from the material dispersion of the amplifier itself, as well as
the fact that if the compressor is
adjusted to compensate for the…
Related Searches: pulse stretcher | multipass amplifier
|
|
|
|
|
6.
COHR_UF2010_Catalog_web.pdf
(PAGE 63 OF 84)
|
|
…or Vitesse.
7
RegA 9000 used with optional, external stretcher/compressor available at additional cost. Seeded with Micra, Mantis, Mira or Vitesse.
8
RegA 9040 and 9050 designs incorporate external stretcher/compressor and are seeded with Micra or Mantis.
9
After warm-up…
Related Searches: rega 9000 | rega 9050
|
|
|
|
|
8.
Mixed gratings Tech Bull.qxd
(PAGE 2 OF 2)
|
|
…it is
fairly easy to produce a compressor that is
a well matched inverse to the stretcher,
allowing recompression with minimal
higher order in phase errors.
However, when the dispersive amplifier
material is included, the compressor
length must be adjusted to compensate…
Related Searches: compressor gratings
|
|
|
|
|
9.
Libra PreInstallation.book
(PAGE 23 OF 35)
|
|
…Stretcher
Routing Mirror
PM1-PM4 Pump Routing
Mirror
RM1, RM4 Regen Cavity
End Mirror
CM1 Compressor Routing
Mirror
SBS Stretcher Beam
Splitter (50%)
PL1-2 Pump Telescope RM2, RM3 Regen Cavity
Pump-through Folding
Mirror
CDI Compressor…
|
|
|
|
|
10.
MP vs RGN Tech Bull.qxd
(PAGE 2 OF 2)
|
|
…timing knob.
Flexibility Because the stretcher/compressor has been
designed to compensate the material
dispersion, other optical components can be
added with slight realignment of the
compressor.
Because the stretcher/compressor are
designed to operate with a minimum…
Related Searches: regenerative | multipass amplifier | pointing stability
|
|
