1 - 10 of 15 Search Results for thermatrack
|
|
|
1.
Beam Quality
|
|
... , the recommended method is to run the laser at higher power, and use a series of external beamsplitters to reduce the laser beam power. Optimize ThermaTrack. ThermaTrack is a moving mirror whose position can be adjusted to compensate for thermal lensing effects of the laser rods. The position of ThermaTrack ...
Related Searches: thg crystal | shg
|
|
|
|
|
3.
Low Power
|
|
... not operating contact Coherent Technical Support at 1-800-367-7890 or your local service representative for assistance. For Avia lasers – Optimize ThermaTrack. ThermaTrack is an end mirror of the laser cavity that translates in order to shorten or lengthen the laser cavity. In this way, the laser ...
Related Searches: thg crystal | shg
|
|
|
|
|
4.
AVIAâ„¢ Features
|
|
... life – typically >20,000 hours – they can be changed easily in the field. Continuously Optimized Performance – ThermaTrack™ is another proprietary Coherent technology used in the manufacture of AVIA lasers. A mirror, mounted on a motor-driven slide assembly, allows movement ...
Related Searches: 355nm cw | 266nm cw laser | thg crystal | laser scribing
|
|
|
|
|
7.
Beam Pointing Instability
|
|
Beam Pointing Instability To Locate Your Nearest Service Center, click here Superior Service Solutions 40+ years of experience Supporting critical environments Highest level of post-sale customer care Long-term customer relationships For Avia lasers – Stabilize head baseplate temperature. Verify ...
Related Searches: pointing
|
|
|
|
8.
UCLD_Catalog_Customer
(PAGE 15 OF 40)
|
|
|
... the laser system. Key Topics: Laser and electrical safety; thermal management; FAP diagnosis, replacement, and calibration, ThermEQ, Pulse Delete, ThermaTrack, SHG/THG/FHG temperature optimization; head-power supply swaps; RS-232 operation; software upgrades. Prerequisites: Some experience with lasers ...
|
|
|
|
|
9.
Avia_266_Preinstallation
(PAGE 24 OF 38)
|
|
|
... laser diode 2 temperature in degrees Centigrade. The allowed temperature range is 10.00 to 40.00°C. DIOPTRIC OPTIMIZE POWER=n DOP=n Initiates the ThermaTrack peaking routine. n = 1 initiates ThermaTrack peaking. (available only in continuous mode, internal trigger only). ECHO=n E=n If n = 0 turns off ...
|
|
|
|
|
10.
Avia_266_Preinstallation
(PAGE 27 OF 38)
|
|
|
... as a percentage nn.n. PRINT CURRENT ?C Returns the average diode current in amps. PRINT D MOTOR POSITION ?MD Returns the motor position for the ThermaTrack motor. PRINT DIODE ON ?DO Returns the state of the diodes 0 if diode current is off. 1 if diode current is on. PRINT DIODE1 CURRENT DRIVE ?D1CD ...
|
|
Coherent Contact Information