---

1.    70410-168e-ILS.UV Best match in this PDF  |  All matches in this PDF ... to convert this to the UV scales with the cube of peak power and typically only yields a few milliwatts of UV power (even for intracavity tripling). Q-switched lasers offer the required high peak power for efficient frequency conversion, but their pulsed output can't be raster scanned at the speeds ... Related Searches: sbr | paladin | vanadate | uv cw laser

2.    pdf_128 Best match in this PDF  |  All matches in this PDF ... investigated wavelength and intensity-dependence of ablation rate achievable with a diode-pumped Q-switched Nd:YAG laser with frequency doubling and tripling. The results indicate that for drilling thick metal samples, using UV output of the laser gives significant advantage due to higher average drilling ... Related Searches: nd yag | beam shaper | q-switched co2 laser | laser micro milling

3.  Laser Direct Imaging with a Modelocked, 355 nm DPSS Laser ... for a reliable, high-power UV laser source with reduced operating costs. The Paladin is a modelocked, diode-pumped, solid-state laser with frequency-tripled output at 355 nm. Output powers of up to 8W are available. Paladin’s all-solid-state construction produces ruggedness, high reliability and long ... Related Searches: laser direct imaging | mode-locked | paladin | uv

4.    MDB-200 Best match in this PDF  |  All matches in this PDF ... tracked during frequency scanning. Other Nonlinear Processes Your local Coherent representative will be able to discuss custom applications, such as tripling, quadrupling, and frequency mixing. 93/42/EEC 0459 INVISIBLE AND VISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION ... Related Searches: mdb | frequency doubler | lbo crystal | dye

5.    ACF487 Best match in this PDF  |  All matches in this PDF ... www.medicaldesignnews.com April 2002 · Medical Design News ous grades of nylon. Hundreds of thousands of thin plastic parts are cut using frequency tripled solid-state (355 nm wavelength) lasers. The shorter UV wavelength is absorbed and couples well with most plastic compounds, especially those polymers ... Related Searches: laser diode array | nd yag | clearweld | stents

6.    OLEreprintCOHERENTJul07 Best match in this PDF  |  All matches in this PDF ... no way to modelock the output of an excimer. The only way to reach the femtosecond regimewithoff-the-shelfcommerciallaser technology is to frequency-triple the nearIRoutputofaTi:sapphireultrafastsystem. The problem is that these benchtop systemshavelimitedpulseenergyandoverall power. Even powerful kilohertz ... Related Searches: excimer polarization | schwarzschild objective | lpx 200

7.    LaserProc_futureHDIrev2  (PAGE 7 OF 10) ... Vanadate, which both operate at a fundamental wavelength of 1064nm. UV-DPSS lasers used for PWB processing usually operate at 355nm, the frequency-tripled wavelength. Short 15- 30nsec. pulse widths are created using an acousto-optic Q-switch, which stores the instantaneous energy used to create high ...

8.  Low-k Dielectric Scribing with UV DPSS Lasers ... Surface Modification Welding and Soldering AVIA Family of DPSS Lasers - AVIAâ„¢ is a family of high-power, all-solid-state, diode-pumped, frequency-tripled, Q-switched ultraviolet lasers, available with average power ranging from 350 mW to >7.0W. View All Application Notes Summary: Low-k dielectric ... Related Searches: laser scribing | avia-x | scan head | 532nm

9.    OLEreprintCOHERENTJul07  (PAGE 1 OF 2) ... to modelock the output of an excimer. The only way to reach the femtosecond regime with off-the-shelf commercial laser technology is to frequency-triple the nearIR output of a Ti:sapphire ultrafast system. The problem is that these benchtop systems have limited pulse energy and overall power. Even powerful ... Related Searches: lpx 300 | lpx 200

10.    LasersBestPresc_0402 Best match in this PDF  |  All matches in this PDF ... www.medicaldesignnews.com April 2002 · Medical Design News ous grades of nylon. Hundreds of thousands of thin plastic parts are cut using frequency tripled solid-state (355 nm wavelength) lasers. The shorter UV wavelength is absorbed and couples well with most plastic compounds, especially those polymers ... Related Searches: co2 laser | laser drilling

---

Search Suggestions: sbr | avia ultra 2000 | lbo crystal | nd yag | beam shaper | nd ylf | lbo | 355 nm cw | avia 355 | q-switched co2 laser

Page 1 2 3 4 5 6 7 8 of 8 | Next

Site Search by

Coherent Contact Information