* Displays beam position with position-sensing quadrant thermopiles (with LM-model sensors like LM-10).
* High resolution 24-bit A/D converter supports four digits of resolution and measurement accuracy equivalent to that found in Coherent’s LabMax meters.
* Spectral compensation is…
…Laser photolithography requires UV both because it is easier to make UV sensitive resists and because deeper UV means better resolution. There are two components to lithography: Interferometric Optics Testing Many applications use high-powered UV pulsed lasers for manufacturing operations.…
…Related Products DC Series HighLight FL-Series HighLight DL Series Related Product Families Laser Machines and Systems CO₂ and CO Lasers Converting Many materials like fabrics, plastic foils, and papers are processed on the fly using a reel to reel process. Applications may be found in the…
converted into laser light is dissipated as heat to the baseplate of the
laser. Additional heat is generated inside the laser by the ovens
containing the crystals for second harmonic generation (SHG) and
third harmonic generation (THG) and a beam dump that converts the
…purity "boil-off" nitrogen source may be used as an alternative. Dry
air may not be used as it contains oxygen which can be converted to
ozone by the deep UV produced by the plasma discharge.
The room in which your…
…purity "boil-off" nitrogen source may be used as an
alternative. Dry air may not be used as it contains oxygen which can
be converted to ozone by the deep UV produced by the plasma
The Innova Sabre MotoFreD ion laser is shipped in three…
Its XUUS (eXtreme Ultraviolet Ultrafast Source) high-harmonic-generation system uses a hollow-core waveguide to convert ultrafast IR pulses to the extreme UV (EUV) or soft x-ray region.
The company's foray into Yb lasers has resulted in the Y-Fi, a highpeak-power fiber laser…
he adds. "CMOS, CCD, or SWIR detectors types are used for
the beam profilers dedicated to UV, visible, or NIR, respectively. Another proprietary approach based on converting IR beams
into visible radiation is used for applications in the IR."
FIGURE 5. Cinogy's CinCam…
to most Coherent power sensors providing accurate power
measurements of all types of CW and pulsed sources from
the UV to Far IR.
This measurement platform can also be used to measure
the energy in a long laser pulse (typically greater than
· UV operation from 10 nm to 355 nm
· Choice of 12 mm or 30 x 40 mm diameter apertures
· Operation with BeamView Analyzer Systems
These Extreme-UV Beam Profiler Optics use UV-to-visible fluorescence
converter face plates to couple the input…
LaserCam-HR II Datasheet
SPECIFICATIONS1 LaserCam-HR II
LaserCam-HR II UV
Sensor Elements (pixels) 1280 x 1024
Effective Pixel Resolution (µm) n/a n/a 20 x 20
Pixel Size (m) 4.6 x 4.6 6.5 x 6.5 n/a
…Part Number 1282868 1282870
a. There is a risk of degradation in the 190 to 300 nm range due to DUV exposure. The optional BIP-12F UV-to- visible
fluorescence converter can be used to prevent drift.
b. It is possible to measure smaller diameter beams, but resolution is reduced.
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.