---

1.    VerdiV2V5V6revB Best match in this PDF  |  All matches in this PDF ... Supply 31.5 kg (69.4 lbs.) Length of Umbilical 3 m (10 ft.) Diameter of Umbilical 3.75 cm (1.5 in.) Meter FieldMaxTM-TO Sensor PM10 Verdi-V2 Verdi-V5 Verdi-V6 System Specifications Verdi V6 Power Curve (Typical Performance) Diode Pump Power (W) 0 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 OutputPower ... Related Searches: verdi 5 | verdi-v5 | verdi 5w

2.    Verdi_V2-V5-V6_Preinstallation  (PAGE 1 OF 18) Preinstallation Manual VerdiTM V-2/V-5/V-6 Diode-Pumped Lasers 5100 Patrick Henry Drive Santa Clara, CA 95054

3.    Verdi_V2-V5-V6_Preinstallation  (PAGE 17 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual 11

4.    Verdi_V2-V5-V6_Preinstallation  (PAGE 5 OF 18) Preface v Symbols Used in This Manual and on the Laser System This symbol is intended to alert the operator to the danger of exposure to hazardous visible laser radiation. This symbol is intended to emphasize the presence of important operating instructions.

5.    Verdi_V2-V5-V6_Preinstallation  (PAGE 6 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual vi Related Searches: verdi v5 manual

6.    Verdi_V2-V5-V6_Preinstallation  (PAGE 8 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual 2 1. Riser/heat sink installation hardware 2. Operator's manual 3. AC power cord 4. Power supply key 5. Installation kit case 6. Interlock-disassembled 7. Fuses and instructions 8. FAP-I installation hardware, including shorting clips, end caps, etc. 9 ... Related Searches: verdi v2

7.    Verdi_V2-V5-V6_Preinstallation  (PAGE 10 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual 4 1. Dowel holes (2) 2. Cooling water inlet and outlet (if included) 3. Laser head clamp screw holes (4) 4. Optical table clamp mounts (4) Figure 1-2. Riser/Heatsink 1. Laser head 2. Protective plastic cover retaining screws (3) 3. Protective material ... Related Searches: verdi laser manual

8.    Verdi_V2-V5-V6_Preinstallation  (PAGE 15 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual 9 Dimensions Table 1-2. Environmental Requirements PARAMETER REQUIREMENT Operating temperature 15 to 35°C (59 to 95°F) Relative humidity 5 to 95% (non condensing) Altitude Sea level to 10,000 feet Figure 1-7. Laser Head Dimensions Related Searches: verdi v2

9.    Verdi_V2-V5-V6_Preinstallation  (PAGE 16 OF 18) Verdi V-2/V-5/V-6 Laser Preinstallation Manual 10 Figure 1-8. Power Supply Dimensions

10.    Verdi_V2-V5-V6_Preinstallation  (PAGE 18 OF 18) Verdi V-2/V-5/V-6 Lasers Preinstallation Manual © Coherent, Inc. 09/2005, Printed in the U.S.A. Part No. 0171-796-00, Rev DB

---

Search Suggestions: verdi-v5 | verdi | dye laser | chiller | verdi 5 | verdi 5w | verdi v-6 | verdi v2 | verdi v6 | verdi-v6

Page 1 2 3 4 of 4 | Next

Site Search by

Coherent Contact Information