Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 67 Search Results for verdi chiller

1Coherent Inc. Troubleshooting Clogged Water Flow of DPSS lasers
Verdi and Vitesse Lasers * Ensure distilled water is used in the chiller. Do not use deionized water, or hard water. Deionized water is corrosive. Hard water contains dissolved minerals, which may eventually precipitate and clog small diameter fittings. Periodically replace the water in the chiller,…
Related Searches: water chiller | verdi operator's manual

2Verdi_preinstall.book  (PAGE 12 OF 18)
…the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. If a water-cooled system is used, position the chiller in the
operating position. Fill and prepare the chiller in accordance…

3pdf document  Verdi V2-V5-V6 Preinstallation Best match in this PDF  |  All matches in this PDF
Verdi power supply and can be displayed on the power supply front panel. Power dissipation through the baseplate is typically 20 to 25 Watts (30 Watts maximum). The Verdi will shut down if the baseplate temperature exceeds 55°C. An optional water-cooled riser/heat sink is available for use with a chiller.…
Related Searches: verdi v5 | verdi laser manual | verdi 5 | laser chiller

4pdf document  Verdi V18 Preinstallation Best match in this PDF  |  All matches in this PDF
…cover Figure 1-3. Laser Head Base - Protective Cover Installed 3 2 1 4 1 4 3 2 Verdi V-18 Laser Preinstallation Manual 5 6. Proceed to the paragraph titled, "Installing the Power Supply". The riser/heat sink clamps and chiller connection will be installed during the final installation procedures. Installing…
Related Searches: verdi 18 | verdi v18 | fap manual | external interlock

5pdf document  Verdi V8-V10 Preinstallation Best match in this PDF  |  All matches in this PDF
…Figure 1-3. Laser Head Base - Protective Cover Installed 3 2 1 4 1 4 3 2 Verdi V-8/V-10 Laser Preinstallation Manual 5 6. Proceed to the paragraph titled, "Installing the Power Supply". The riser/heat sink clamps and chiller connection will be installed during the final installation procedures. Installing…
Related Searches: verdi 8 | verdi v10 manual | interlock | verdi laser manual

6Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…
Related Searches: water chiller | verdi laser manual

7Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…
Related Searches: verdi v18 manual

8Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…

9Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…

10pdf document  Vitara Preinstallation Manual Best match in this PDF  |  All matches in this PDF
…included is a stand-alone closed-loop water chiller to provide thermal stability for the entire system. Figure 2-1. Vitara Laser System Vitara Pre-Installation Manual 2 - 2 Vitara Laser Head A key feature of the Vitara laser system is the incorporation of the Verdi G-series pump laser into one box with the…
Related Searches: laser glasses | safety glasses | 532nm cw dpss laser | vitara


Page 1 2 3 4 5 6 7 of 7 | Next


Site Search by  Site Search powered by SLI Systems
.