Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 25 Search Results for water chiller verdi
1.  Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…
Related Searches: verdi chiller

2.  Coherent Inc. Troubleshooting Clogged Water Flow of DPSS lasers
…Water Flow For AVIA, Verdi and Vitesse Lasers * Ensure distilled water is used in the chiller. Do not use deionized water, or hard water. Deionized water is corrosive. Hard water contains dissolved minerals, which may eventually precipitate and clog small diameter fittings. Periodically replace the water…
Related Searches: water chiller | algae | verdi chiller | troubleshooting verdi

3.  pdf document  Verdi V2-V5-V6 Preinstallation Best match in this PDF  |  All matches in this PDF
…Verdi power supply and can be displayed on the power supply front panel. Power dissipation through the baseplate is typically 20 to 25 Watts (30 Watts maximum). The Verdi will shut down if the baseplate temperature exceeds 55°C. An optional water-cooled riser/heat sink is available for use with a chiller.…
Related Searches: water chiller manual | verdi laser manual | verdi v5 | verdi manual

4.  pdf document  Verdi V8-V10 Preinstallation Best match in this PDF  |  All matches in this PDF
…the laser, and shall be within easy reach of the operator. LASER HEAD AIR COOLED POWER SUPPLY UMBILICAL FACILITY POWER WATER LINES (if using Water Cooling) CHILLER FACILITY POWER Verdi V-8/V-10 Laser Preinstallation Manual 9 Dimensions Table 1-2. Environmental Requirements PARAMETER REQUIREMENT Operating…
Related Searches: verdi v10 manual | verdi manual | verdi v8 manual | v10

5.  pdf document  Verdi V18 Preinstallation Best match in this PDF  |  All matches in this PDF
…the laser, and shall be within easy reach of the operator. LASER HEAD AIR COOLED POWER SUPPLY UMBILICAL FACILITY POWER WATER LINES (if using Water Cooling) CHILLER FACILITY POWER Verdi V-18 Laser Preinstallation Manual 9 Dimensions Table 1-2. Environmental Requirements PARAMETER REQUIREMENT Operating temperature…
Related Searches: wiring diagrams | verdi v18 | verdi chiller | chiller manual

6.  pdf document  Vitara Preinstallation Manual Best match in this PDF  |  All matches in this PDF
…included is a stand-alone closed-loop water chiller to provide thermal stability for the entire system. Figure 2-1. Vitara Laser System Vitara Pre-Installation Manual 2 - 2 Vitara Laser Head A key feature of the Vitara laser system is the incorporation of the Verdi G-series pump laser into one box with…
Related Searches: verdi 10 | 532nm cw laser | laser diode coherence length | 210 power meter

7.  Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…
Related Searches: water chiller | verdi chiller | verdi laser manual

8.  Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…

9.  Verdi_preinstall.book  (PAGE 12 OF 18)
…between the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. Position the chiller in the operating position. Fill and prepare
the chiller in accordance with the chiller user's…

10.  Verdi_preinstall.book  (PAGE 12 OF 18)
…the Verdi output
and any laser being pumped.
Excessively tight umbilical bends (less than a 5 inch radius) can
cause permanent damage to the optical fiber.
2. If a water-cooled system is used, position the chiller in the
operating position. Fill and prepare the chiller in accordance…
Related Searches: verdi manual

Page 1 2 3 of 3 | Next


Site Search by  Site Search powered by SLI Systems
.