…use some form of recirculating chiller to minimize water use. Recirculated water should be filtered to remove particulate matter from the coolant, and algaecide should be added to prevent biological fouling. For filtration, a Balston 53/18 filter with an LP-200-18-10 cartridge, providing 75 micron filtration…
Related Searches:k 250 manual | diamond manual | expander | ddi interface
…Always use a waterfilter on the inlet to the laser to remove particulates. Particulates are undissolved material such as sand and rust. They can deposit on the tube, foul the flow meter, and form sediment in the cooling path. A filter is an inexpensive way to eliminate them. Waterfilters are rated according…
Related Searches:water chiller manual | water chiller | water cooling | innova 300 manual
…meter (25 ft.) lengths of 16 mm (5/8 inch) I.D. hose which are supplied with each laser. These figures do not include a 60 micron waterfilter. A new 60 micron waterfilter introduces a 5 kPa (0.75 psi) pressure delta at 22.7 liters (6 gallons) per minute or a 2 kPa (0.30 psi) pressure delta at 8.5 liters…
Related Searches:innova 90 | innova 300c | innova manual | bbo crystal
…Disconnect) DI Water Outlet DI Filter Column Particle Filter Temp Controller Fault Indicator On/Off/Remote Sw DI Water Inlet Drain Power Cord Reservoir (Tank at Bottom) SCU Interface Fill Port Description and Specifications 7 During operation, the chiller circulates filtered de-ionized water maintained at…
Related Searches:laser wire stripper | rf power supply | tube | 4 axis mount
…Filtering To prevent accumulation of debris in the cooling system, the coolant should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than 30 µm in diameter, unless specified by the chiller manufacturer to use a finer filter.…
Related Searches:e400i manual | laser chiller | low coolant level | java
…meter (25 ft.) lengths of 16 mm (5/8 in.) I.D. hose which are supplied with each laser. These figures do not include a 60 micron waterfilter. A new 60 micron waterfilter introduces a 5 kPa (0.75 psi) pressure delta at 22.7 liters (6 gallons) per minute or a 2 kPa (0.30 psi) pressure delta at 8.7 liters…
Related Searches:i322c | innova 90 | innova 300 user manual | innova manual
…meter (25 ft.) lengths of 16 mm (5/8 in.) I.D. hose which are supplied with each laser. These figures do not include a 60 micron waterfilter. A new 60 micron waterfilter introduces a 5 kPa (0.75 psi) pressure delta at 22.7 liters (6 gallons) per minute or a 2 kPa (0.30 psi) pressure delta at 8.5 liters…
Related Searches:innova 90 manual | innova 90c manual | cooling | innova 70 user manual
…meter (25 ft.) lengths of 16 mm (5/8 in.) I.D. hose which are supplied with each laser. These figures do not include a 60 micron waterfilter. A new 60 micron waterfilter introduces a 5 kPa (0.75 psi) pressure delta at 22.7 liters (6 gallons) per minute or a 2 kPa (0.30 psi) pressure delta at 8.5 liters…
Related Searches:lm20 | krypton laser | lm-20 | innova
…Filtering To prevent accumulation of debris in the cooling system, the coolant should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than 30 µm in diameter, unless specified by the chiller manufacturer to use a finer filter.…
Related Searches:oem manual | coherent laser cables | rf module | e1000
…filter. This ripple current degrades the noise performance of the laser and shortens the lifetime of the filter capacitors. 2. Consult applicable electrical codes for your area to select appropriate electrical service hardware. Power supply is fused at 80 amps. Preinstallation Guidelines 3 Cooling Water…
Related Searches:sabre laser | innova 300 | innova 300 manual | innova sabre manual