Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 32 Search Results for wave master

1pdf document  Mode Master White Paper July 2011 final Best match in this PDF  |  All matches in this PDF
…spurious results will occur. The rate of drum rotation and the sensor response time limits the system to measuring beams that are either true continuous wave (CW), or pulsed at repetition rates of greater than 10 MHz. This combination of beam size and divergence, wavelength and repetition rate factors means…
Related Searches: diffractive optical element | laser alignment paper | focus | field master

2Mode_Master_White_Paper_July_2011_final.pdf  (PAGE 4 OF 5)
…occur.
The rate of drum rotation and the sensor response time
limits the system to measuring beams that are either
true continuous wave (CW), or pulsed at repetition
rates of greater than 10 MHz.
This combination of beam size and divergence,
wavelength and repetition rate…

3pdf document  Paladin Preinstallation RevAA Best match in this PDF  |  All matches in this PDF
…Supply Option. 3-17 Chiller Option . 3-18 Parts List. 4-1 LIST OF ILLUSTRATIONS 1-1. Label Locations. 1-6 2-1. Laser Head . 2-8 2-2. Power Supply (Master) . 2-9 2-3. Power Supply (Slave) . 2-11 3-1. Shipping Label Indicators. 3-1 3-2. Head Shipping Crate. 3-4 3-3. Power Supply Shipping Crate. 3-5 3-4…
Related Searches: low coolant level | fap b | water cooled beam dump | paladin 355

4pdf document  Synchrolock-AP DS 3 Best match in this PDF  |  All matches in this PDF
…Synchrolock-AP Features · The Synchrolock-AP accessory locks the pulse repetition rate of one "Slave" Mira or Micra laser to another "Master" Mira or Micra laser, or to a "Master" external RF source · Femtosecond (Mira and Micra) and/or picosecond (Mira only) operation · Three cavity length actuators provide…
Related Searches: synchro-lock ap

5pdf document  instruction manual Best match in this PDF  |  All matches in this PDF
…on the laser. For more information about the safety key box, refer to section 5.5. 3.6 Modulating the Laser The standard laser runs on Continuous Wave mode. However, lasers can have two power adjustment options; these options must be chosen at the time of order. (1) Power Adjustment Potentiometer:…
Related Searches: laser lifetime | cdrh class | class ii laser | mode master

6COHR_RLS2009_catalog.pdf  (PAGE 43 OF 76)
…Features
· The Synchrolock-AP accessory locks the pulse repetition rate of one "Slave" Mira or Micra laser
to another "Master" Mira or Micra laser, or to a "Master" external RF source
· Femtosecond (Mira and Micra) and/or picosecond (Mira only) operation
· Three cavity length actuators…

7COHR_UF2010_Catalog_web.pdf  (PAGE 47 OF 84)
…Advantages
· The Synchrolock-AP accessory locks the pulse repetition-rate of one "Slave" Mira or Micra laser
to another "Master" Mira or Micra laser, or to a "Master" external RF source
· Femtosecond (Mira and Micra) and/or picosecond (Mira only) operation
· Three cavity length actuators…

8pdf document  ExcimerLasersforSuper-HighNA193nmLithographyRev2 Best match in this PDF  |  All matches in this PDF
…This laser is based on a single laser chamber and therefore avoids the complexity of dual chamber strategies such as MOPA (master oscillator / power amplifier) or MOPO (master oscillator / power oscillator). 2. DESIGN ASPECTS Excimer lasers for microlithography are operating with a repetition rate of…
Related Searches: novaline | 193 nm laser | sergei | ldu

9Mantis_DS  (PAGE 2 OF 2)
….0
1.5
2 4 6 8 10 12
(RMS; 0.02 Hz to 1 kHz)
tjitter = 55 fs
Slave Oscillator Jitter
Mira (fs) Mira (ps) Micra
Master Oscillator
Mira (fs) <250 <250 <250
Mira (ps) <250 <250 <250
Micra <250 <250 <250
rf Source6,7
(low harmonic content) <550…

10pdf document  man green-powerline Best match in this PDF  |  All matches in this PDF
…motion for image capture by strobing the light source. Follow the instructions in section 3.1 to properly connect the laser to either CW (Continuous Wave) mode or Modulation mode. The modulation source is connected to the DB9 connector. You can modulate the laser in one of two modes: 3.4.1 Standard Mode…
Related Searches: eye damage | laser cooler | green laser | red laser


Page 1 2 3 4 of 4 | Next


Site Search by  Site Search powered by SLI Systems
.